How to know the ranking of sites

As we know that Internet provides us a platform where all can board the sites which takes them to their goals. People get the queries not from others or books but they refer a place where information can be obtained from a point to click method. But how to know about the site is a big question. Sites are ranked according to its content that are shared or provided to the users and a good Ranking sites always be ready to help you in a best way.

 

Lets take a look how one can find any site ranking.

 

Alexa, a renounced site is a major ranking distributer sites in the whole web-world. You just have to do a small work to install the “Alexa Toolbar” in your browser. Just go to www.alexa.com and download the tool bar which will be shown in that site. It is easy to install and will hardly take few minutes to get install in your browser. It support almost every browser. When it gets install it automatically shows the ranking of the open sites and anyone can easily judge about any site.

 

For site owner whose ranking are not shown in Alexa they can register themselves in Alexa and provides all the necessary details regarding their domains. Alexa will give a “Metatag” to them. You just have to paste it at the required place and after 24 hours your site ranking will be displayed.

 

Please feel free to ask any question you have regarding this post and do comment if you like it

DOS / Windows IP Commands

Display connection configuration: ipconfig/all

Display DNS cache info: ipconfig/displaydns

Clear DNS cache: ipconfig/flushdns

Release all ip address connection: ipconfig/release

Renew all ip address connection: ipconfig/renew

Re-register the DNS connection: ipconfig/registerdns

Change or modify DHCP class id: ipconfig/setclassid

Network connection: control netconnections

Network Setup Wizard: netsetup.cpl

Test connectivity: ping www.example.com

Trace IP address Route: tracert

Display the TCP/IP protocol Sessions: netstat

Display Local Route: route

Display Resolved MAC Address: arp

Display name of computer currently on: hostname

Display DHCP class information: ipconfig/showclassid

How to share internet through wireless

There are two types of system:-

1.  Client System
2.  Server system

Clients are such host or system which takes data from server or can even accesses net from it where as server fulfills the request of client and acts as centralized system. In a simple term if one system has a modem then we can say it as a server and it’s internet can be easily accessed in other system which we can say as a client.

What is the need of client server communication?

If suppose one has a broadband modem and that person is using it then other have to wait for internet till he/she give the modem but with client and server communication we can share the net between more than two computer system no matter if one has single broadband. With the knowledge of this one can also share the resources i.e. transfer data between two or more system through wireless (WI-FI) or LAN cable.

Here is a simple tutorial which will guide you the setup for sharing internet between more than two systems. The process is simple and can be implemented in any O.S whether it will be XP, VISTA, or WINDOW-7.

For Client Configuration:

You need to have a wireless network to be built in your system. There is a tutorial here in my blog which will tell you how one can create a wireless network system.

Step 1: Open network and sharing center if you have window-7 as shown here:

Step 2: Click on the “Change adapter setting”.

Step 3: You will be shown different network in your system. Right click on the wireless network and select properties. Make sure that your wireless is on.

 Step 4: The new window will pop up and in that select (TCP/IP4) and click properties.

  

Step 5: Fill in the same details as u will see. (Note: the last number is encircled in snap it means that if you want to connect more than one computer as a client then you can change that last digit according to your wish in different computers but not more than 254 provided that no two clients will have that encircled number same.)

Step 6: Now click on OK. A warning will be displayed but click on OK again and then click OK again to close the window pop-up. Now you are done with your host i.e. client system configuration. 

For Server Configuration:

It will be on a different computer.

Do not connect to the internet first not even with your network.

Follow procedure till Step 4 as mentioned above. After this select (TCP/IP4) and click properties and fill in the same details as u will see. You need to fill only the two line details as shown and do noticed that for server the encircled number must be 1.

Now you are done with all the steps. Click OK all the time to close each window. Now enjoy net in your system through wireless. But before this learn:-

1.      How to create wireless network, and( http://zohsoft.blogspot.com/2011/04/how-to-create-wireless-network-in.html )

2.      How to share network.(http://zohsoft.blogspot.com/2011/04/how-to-share-connection-for-window-7.html)

Connect to the internet and also connect to your network (Test). On the other computer (Test) network will be seen, connect it with by typing the network key and wait for 2 to 3 minutes and done. You can access net in your computer.

Please feel free to ask any queries regarding any post ..

How to Share Connection for window-7

 There are basically two types of connections:-

1. Dial-up connection.
2. Broadband connection.

Before sharing internet between two or more computer one need to share the connection first. Dial-up are usually used when one connect net from mobile with computers whereas Broadband connection are also made manually or some modem device has application which create a connection automatically.

Here in my tutorial I m going to tell u how you can share your connection so that you can share your net. I m using “Reliance Netconnect” modem so I will tell you to share this connection only. You can even share your Dial-up also but it’s not wise to share it as you won’t get the proper speed for browsing.

Step 1: Click the wireless network icon on the task bar, provided your wireless is ON and click “open network and sharing center”.

Step 2:  As shown in snap shot click on “Change Adapter Setting”.

                 

Step 3: After clicking it you will see another window which will show you the different connection. If you are using any broadband connection it will be listing here. You just have to right click it and select properties (E.g. Reliance).

    

Step 4: Now you will be guided to another screen as shown below

    

Step 5: Click OK to close the entire window and now you are done with your work and your connection is shared.

Now you can share your net by reading my other post. Thanks for your patience and do ask if you have any queries.

How to create wireless network in window-7

Creating wireless network is very important if you want to connect two or more computers or if you wants to share net from other computer. There are simple steps which are easy to follow and will guide you to create your own WI-FI network easily.

Step 1: Click the wireless network icon on the task bar, provided your wireless is ON and click “open network and sharing center”.

Step 2:  As shown in snap shot click on “setup a new connection or network”.

                                  

Step 3: Select the option shown in snap shot and clicks next.

                           

Step 4: You will see this snap shot. Click next again.

                      

Step 5: Type in the network name you want, select WEP from option list and type in the password. Note: the password must be of 5 character length or 13 but not in between. Check the save network box and click next.

            

Your wireless network is created successfully. Now you can check the name of your network that you have typed when you will click on the wireless network icon. As shown below.

                                                 

Click on the network (Test) and click connect. It will look like this. You will see” waiting for users” option only on the computer in which it is created.  

                             

Now check it on the another computer, you will see your network (Test) will be displayed and other people can connect with your wireless network by typing the same key which you typed while creating it.

Note: You won’t be able to see the network (Test) in other computer which you have created if:-

1.       You won’t turn your wireless ON, and

2.       You did not connect to network you created (Test) in your computer.

You have to click on the connect option of the network (Test) you have created. Then only the other can see it. Thanks for your patience.

Do ask me if you have any queries. Ask your queries via comments.